Back

StoneMedic™ CGI Ceramic Grout Impregnator

Grout line impregnator that repels water, soil and grease.The innovative, water-based formula penetrates the pore structure of grout with special oil and water repellent polymers and additives.

  • Ecolab PIC: 6100858
  • GTIN Number: 10025469574715
Order Now
Features & Benefits

Features & Benefits:

Use on ceramic tile and grout

How To Use

Directions for Use:

  1. Shake well before use.
  2. Apply StoneMedic™ CGI Ceramic Grout Impregnator using a pump up sprayer, roller, or applicator pad. Avoid pouring material directly on the surface.
  3. Allow 15 minutes for penetration.
  4. Remove all excess with a squeegee followed by wiping with a dry absorbent cloth to ensure no product remains on the surface.
  5. If after the 15 minute dwell time, no excess is visible, wait 2 hours and reapply, allow to stand, and remove as above.

Additional Notes:

  • Treated area may be opened to foot traffic in 2 hours, but refrain from deep cleaning for 24 hours.
  • Maximum stain protection is not achieved for up to 24 hours.
  • The area to be impregnated should be totally clean, dry, and free of any topical coatings.
  • Allow newly installed floors to cure prior to impregnating.
  • This product does not provide protection from sub floor humidity.

WARNING:

  • This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Top
alert-icon

This site uses cookies and other technologies to offer you a better browsing experience, analyze site traffic, and provide you with personalized content. By using this site, you consent to our use of cookies. Read our Privacy Policy as well as our Cookie Policy for more information.