Back

StoneMedic™ CTP-2 Ceramic Tile Polish #2

The second step in a two-part program that promotes a high gloss on most vitrified, unglazed ceramic, porcelain and quarry tile floors.

  • Ecolab PIC: 6101094
  • GTIN Number: 00025469656087
How To Use

Directions for Use:

  1. Clean and prepare floor with CTP-1 before using CTP-2.
  2. Wet a 25 sq ft (sq m) area with clean water.
  3. Use approximately 3 oz (84 grams) of StoneMedic™ CTP 2 Ceramic Tile Polish-2 for the 25 sq ft (2.5 sq m) area.
  4. Use a natural fiber pad mounted on a StoneMedic™ Mighty Max Floor machine.
  5. The CTP 2 should be buffed into a slurry over the 25 sq ft (2.5 sq m) area. Add water as necessary to maintain proper slurry consistency.
  6. Work the material slowly over the area for approximately 10 minutes.
  7. When the desired level of gloss has been reached, wet vacuum the area thoroughly.
  8. Double flood rinse to remove all residue.
  9. Move to the next 25 sq ft (2.5 sq m) area and repeat. Overlap areas to blend.
  10. Let dry and buff with a white pad to remove all remaining surface residue.
  11. Impregnate grout lines for ongoing protection against soiling.

Note:

  • Use CTP 1 to clean and prepare tile prior to using CTP 2.
  • Follow directions for CTP 1 carefully.
  • It is important to start with a clean surface free of coatings and soiling.
  • Protect adjacent areas with StoneMedic Poly Protector.
  • Do not allow StoneMedic™ CTP 2 Ceramic Tile Polish-2 to dry on surface.
  • Not for use on glazed porcelain tile.
Top
alert-icon

This site uses cookies and other technologies to offer you a better browsing experience, analyze site traffic, and provide you with personalized content. By using this site, you consent to our use of cookies. Read our Privacy Policy as well as our Cookie Policy for more information.