StoneMedic™ GPC Granite Polish Cream

Provides the final polish to granites after restoration, and can be used a part of a maintenance program to re-polish lightly worn traffic patterns without honing.

  • Ecolab PIC: 6161063
  • GTIN Number: 10025469574760
How To Use

Directions for Use:

  1. Remove any topical coatings.
  2. Rinse well.
  3. Wet an approximate 15 square foot (1.5 sq m) area with clean water. Do not flood the area.
  4. Apply approximately 3 U.S. ounces (0.1 L) of StoneMedic™ GPC Granite Polishing Cream in the center of the wet area.
  5. Use a Mighty Max Floor Machine fully loaded with weights. Fit the unit with either a red or natural fiber pad to work the product over the area to be polished. Add water as necessary to maintain a slightly thick cream.
  6. Work in a slow, side to side motion, for approximately 10 minutes or more if necessary, until the desired level of polish has been achieved.
  7. Flood rinse and wet vacuum the area.
  8. Repeat the process in the next area, overlapping the previous area to blend.
  9. When completed, thoroughly rinse and wet vacuum entire polished area.
  10. When dry, buff with a white pad to remove any residue and promote a deep gloss.

This site uses cookies and other technologies to offer you a better browsing experience, analyze site traffic, and provide you with personalized content. By using this site, you consent to our use of cookies. Read our Privacy Policy as well as our Cookie Policy for more information.