TB Disinfectant Cleaner Ready-to-Use

Features & Benefits:

Convenient ready-to-use formula

Quicker hospital disinfection than dilutable quat products

Kills Norovirus in 30 seconds

Great solution for bloodborne pathogen cleanup

Broad-spectrum efficacy

Uses/Solutions:

May be used in the kitchen on counters, sinks, appliances and stovetops

A rinse with potable water is required for surfaces in direct contact with food

Use on: floors, walls, metal surfaces, stainless steel surfaces, glazed porcelain, glazed ceramic tile, plastic surfaces, bathrooms, shower stalls, bathtubs, and cabinets

For use in hospitals, nursing homes, schools, transportation terminals, office buildings, manufacturing facilities, lodging establishments, retail businesses and athlete/recreational facilities where housekeeping is of prime importance in controlling the hazard of cross contamination

Directions for Use:

Disinfection, Deodorizing and Cleaning:

1. Remove gross filth or heavy soil prior to application of the product.
2. Hold container six to eight inches from surface to be treated.
3. Spray area until it is covered with the solution.
4. Allow product to penetrate and remain wet for 3 minutes (for Bloodborne Pathogens: allow surface to remain wet for HIV-1 one minute and for HBV and HCV 5 minutes). No scrubbing is necessary.
5. Wipe off with a clean cloth, mop or sponge.

One-step cleaning and disinfection of toilet bowls and urinals:

1. Remove water from bowl by forcing water over trap with a swab mop applicator.
2. Press swab mop against side of the bowl to remove excess water from applicator.
3. Apply 1 to 2 ounces of this product evenly, allowing sufficient time for product to cover entire surface of bowl for maximum cleaning.
4. Swab bowl completely using a scrub brush or toilet mop, making sure to get under the rim.
5. Let stand 3 minutes and (for Bloodborne Pathogens: allow surface to remain wet for HIV-1 one minute and for HBV and HCV 5 minutes) and flush

Mildewstat

1. To control mold and mildew on pre-cleaned, hard, non-porous surfaces spray surface to be treated making sure to wet completely.
2. Let air dry.
3. Repeat application at weekly intervals or when mildew growth appears.